The wired network requires a quick registration process to connect. Any device with an ethernet port can connect to this network, including desktop and laptop computers, gaming consoles, watches, cameras, media players, etc.
Printers are not supported by campus ethernet or wifi.
The following methods are recommended for connecting to personal printers on campus:
USB cable, AirPrint, WiFi Direct, and Bluetooth.
Step 1 - REGISTER
Go to Device Registration and log in with your Cal Poly email address (username@calpoly.edu) and password, then click Log In.
Click the Create Device or Create New Device button.
Enter the device's 12 digit ethernet/wired hardware/MAC address, separate the characters with colons (XX:XX:XX:XX:XX:XX), then select Wired for the Device Type.
To share access to your device, enter Cal Poly email addresses (username@calpoly.edu) separated with commas, then click Create.
On the next page, you will see your personalized network password, which will only work for that registered device.
Step 2 - CONNECT
If you are plugging into:
a wall port, you will typically use ports labeled W.
an Aruba access point, use ports E1, E2 or E3. Do not plug into the port farthest to the left.
Using a ethernet cable, plug one end into your computer's ethernet port, and the other end into the wall port or Aruba Access Point.
On your computer, open a web browser. You should be prompted to enter your Cal Poly username (do not include @calpoly.edu) and password. Click Log in.
You should now be connected via ethernet.
Troubleshooting
If your browser doesn’t display the login page, browse to any website (like calpoly.edu or amazon.com) and you should automatically be redirected to the login page.
If you aren't redirected, click on the link below for your device, then browse to a website to confirm you're connected.
Windows: msftconnecttest.com/connecttest.txt
Mac: captive.apple.com
Unplug the ethernet cable from your computer, wait 10 seconds, then plug it back in and repeat troubleshooting steps 1 and 2.
If you still need help, submit a University Housing Tech Support request and include building #, room #, faceplate #, and a photo of the port.
(Optional Step) - SHARE
VIEW Devices and Passwords (optional)
Go to Device Registration and log in with your Cal Poly email address (username@calpoly.edu) and password.
Click Manage Devices, then click on the device you'd like to view.
Click Edit to see specific information about a device, including its device type and who the device is shared with. If you register a wired device as wireless or vice versa, you can change the device type here. The Wi-Fi password will automatically be generated if necessary.
Click Update Device to save any changes.
Looking for WiFi Support? See Connect to CP-IoT-Secure (Gaming and Media WiFi Network)
Students: By accessing the network, you agree to the Cal Poly Responsible Use Policy and the Use of Electronic Recording Devices Policy.