eduroam is Cal Poly's primary WiFi network, available to students, staff and faculty. Connecting a device to the network requires a one-time setup, using your full Cal Poly email address (including the @calpoly.edu) and password. Once you've logged into eduroam, you can connect on campus at Cal Poly or any time you visit an eduroam-member institution in the U.S. and worldwide. Game consoles, media streaming and other smart devices in campus housing should connect to the CP-IoT-Secure network.
Info |
---|
You may see a one-time system message when connecting to the eduroam network, requiring you to manually accept a certificate. "Trust" the certificate to connect to the network. |
...
Expand |
---|
|
- From your Home screen, go to Settings > Wi-Fi.
- Select the eduroam WiFi network from the list.
- Enter your full email address (username@calpolyusername@calpoly.edu) and the password you normally use at your home university.
- Tap Join. If you can't tap Join, the password you've entered is incorrect.
- On the Certificate screen, tap Trust.
- You should now be connected to the eduroam WiFi network.
Info |
---|
If you are unable to connect to eduroam after following these instructions, force restart your device then try connecting again. |
|
...
...
Expand |
---|
|
- From your Home screen, open your device's Settings app. Tap Wi-Fi.
- Select the eduroam WiFi network from the list.
Make sure the following information matches the information on your phone, then enter your full email address (username@calpoly.edu) and the password you normally use at your home university.
- EAP method: PEAP
- Phase 2: MSCHAPv2
CA certificate: Use system certificates (This field is automatically populated and can't be changed.) - Domain: calpoly.edu
Identity: Your university (Cal Poly) email email address - Anonymous identity: leave blank
Password: Your university (Cal Poly) password
- Tap Connect. You should now be connected to the eduroam WiFi network.
Info |
---|
These instructions are valid for Android 11. For earlier Android versions, the “Use system certificates” and “Do not validate” options may be in different fields. |
|
...