Page Comparison

1. If you are plugging into:

   1. a wall port, you will typically use ports labeled W.
      

      

   2. an Aruba access point, use ports E1, E2 or E3. Do not plug into the port farthest to the left.
      

      

2. Using a ethernet cable, plug one end into your computer's ethernet port, and the other end into the wall port or Aruba Access Point.
    

   

3. On your computer, open a web browser. You should be prompted to enter your Cal Poly username (do not include @calpoly.edu) and password. Click Log in.

4. You should now be connected via ethernet.

You can share access to your device with other Cal Poly users by logging into Device Registration and clicking Manage Devices. Normally, your device will not be seen by anyone else. Once sharing is enabled for another user, they will be able to see the device (e.g. AirPlay).